Thousands perform Wavlink wireless range extender setup in their houses to satiate their hunger for accessing internet connection with the speed of lightning. However, this experience gets ruined if the light on the extender suddenly starts flashing red. If the same is the case with you, then know that your Wavlink extender is demanding attention. So, let’s dive deep in and find out what can be done if the LED light on your Wavlink extender turns red all of a sudden.
Fixed: Wavlink Extender Red Light
- Update the Firmware
Before you get down to any other hack, you should consider accessing the wifi.wavlink.com login screen and updating the firmware of your Wavlink extender. This is to inform you that like every other networking device, your Wavlink extender is also equipped with firmware that controls its overall performance. Chances are that the outdated firmware of your extender is putting you in the trouble of facing the Wavlink red light issue. After updating the extender’s firmware, see to it whether the light on your Wavlink device has started behaving normally or not. If not, then get ready to do more work.
- Reboot the Extender
The next troubleshooting technique in line to fix the Wavlink extender red light issue is to reboot the extender. It is required when technical glitches take over the extender’s ability to perform well. Know that technical glitches can also give birth to major technical issues. Therefore, without wasting a minute, we recommend you pull your extender out of the wall plug gently, wait patiently for as long as you can, and re-plug your WiFi device back into its respective power socket.
- Check the Power Socket
Did rebooting the extender also fail to rid you of the Wavlink WiFi extender red light issue? Well, there are chances that your Wavlink extender is not getting the desired amount of power from its electrical outlet. To turn the tide in your favor, we recommend you run a check on the wall socket that has been provided the responsibility of supplying power to your Wavlink extender. Is it damaged? You’ve just found another reason for forcing your Wavlink device to flash red. Thus, you have to unplug your extender from the existing outlet and plug it into another one. This time a non-damaged power socket must be used.
- Bring Your Devices Closer
After completing the extender setup process via the Wavlink WiFi extender login page, it is suggested that the device must be moved so that every dead zone in the house will turn into a fun zone. But, it seems that you did not follow the complete rules. Keep in mind that your device will function well only if it is in close contact with the host router. However, it is not advised to make the distance zero. Else, do you know what will be the conclusion? The signals of your device won’t even seek your permission before getting clashed.
- Check the Ethernet Cable
Yes, the Ethernet cable is one of the best connection sources when it comes to networking. But, do you know it needs to fulfill a few criteria before getting certified for the networking job? Those criteria are nothing more than its damage-free status and rate of data transmission (after being connected). However, after using the Ethernet cable it must be ensured that the connection is firm from the end of the Wavlink extender as well as the host router. Otherwise, the red light on your Wavlink extender will continue to scare you.
- Change the Extender’s Placement
You might also find yourself involved in the mess of the Wavlink extender red light issue if the device is not placed at an optimal location. The optimal location of the Wavlink range extender is any location that does not house reflective surfaces, metal objects, devices emitting electromagnetic frequencies, and objects carrying a large amount of water. So, place your extender at a location deprived of such things and see if your extender changes its mood and stops flashing red.
- Reset the Extender
If none of the aforementioned techniques have worked in your favor, then it’s time to play the final card. Chances are that your Wavlink extender’s improper configuration is bringing you bad luck. Thus, you have to press the Reset button on your extender and restore it to the factory default mode.
Sum Up
Here, we wind up our 7-step guide to fix the Wavlink extender red light issue. We hope that you will be able to change your fate with the help of the troubleshooting techniques mentioned above. However, do not forget to set up your extender again by accessing the Wavlink login page.
