Due to the fact that their Comfast CF-EW71 extender isn’t actively showing its SSID, a large number of individuals throughout the globe are unable to join their extender network. Let’s go through all the potential causes of your Comfast CF-EW71 extender SSID not appearing so you can fix it. Now, then, let’s begin.
How to Fix Comfast CF-EW71 Not Broadcasting SSID?
1. Place Your Comfast CF-EW71 Properly
One of the most common causes of an SSID not being broadcast by a Comfast CF-EW71 extender is that the device is not in the optimal location.
It has been determined that your Comfast CF-EW71 extender will not show up in the list of accessible WiFi networks if it is placed in a distant area and is not getting WiFi signals from the existing router. Therefore, place the extender in a spot where it can readily pick up WiFi signals from the router.
2. Remove Physical Impedances
In the event that your WiFi extender and router are surrounded by WiFi-interfering devices, the Comfast CF-EW71 extender SSID problem is another possibility. The problem may be easily fixed by relocating your router and extender to a higher location, out of reach of the offending devices.
Signal interference may be reduced by mounting the range extender in the wall’s dead center. They are typically created by things like electronics, metal appliances, Bluetooth speakers, aluminum studs, reflecting surfaces, and so on.
3. Verify Cable Connections
Connection issues might potentially result in the Comfast CF-EW71 extender not broadcasting the SSID. As such, you’ll need to make sure that both your Comfast CF-EW71 extender and router are receiving enough power from their respective sockets.
When we talk about cables, the Ethernet cable is also considered. Thus, it should not be damaged from any point. Else, the issue will keep troubling you.
4. Install the Extender Properly
Verify that the Comfast CF-EW71 extender has been set up properly. The internet connection may be interrupted by the “Comfast CF-EW71 extender not broadcasting SSID” issue if your extender has been improperly or insufficiently set up.
Thus, you have to perform Comfast repeater setup properly to get the issue fixed. For setup instructions, you can take the assistance of the extender’s handbook.
5. Update the Driver
The wireless network driver allows your computer to talk to your WiFi and network cards. There might be a problem with your computer’s WiFi network drivers if the extender isn’t registering as an SSID.
Quick Tip: Changing the wireless channel is a simple but efficient way to decrease interference with the signals of your Comfast CF-EW71 extender, which should help address the SSID not showing problem.
6. Unhide the WiFi Name
If the SSID problem cannot be attributed to any of the aforementioned causes, you may attempt the troubleshooting steps provided below.
- Restarting the extender is the first step. Make that the LED lights on the extender are green when it is plugged in and turned on.
- After the wireless link has been established between the network and the extender, the next step is to decide on the hardware configuration. Use an Ethernet cable to link the two gadgets together.
- It’s time to move the WiFi repeater closer to the main hub. Look to check whether the choice to connect to a WiFi network is buried on your device. Even while hiding your WiFi network is a great way to prevent hackers from accessing your internet, it may prevent your Comfast CF-EW71 Extender from showing up as an SSID on your devices. Thus, unhide the WiFi name by doing Comfast login.
In a Nutshell
If you’ve exhausted all other options and still can’t get your Comfast CF-EW71 extender working, try resetting it. You can have a problem with the device’s setup that you’re not even aware of. Really, that’s all there is to it. If you were successful in fixing the issue of your Comfast CF-EW71 extender not broadcasting the SSID, please share your chosen method with us.
