To put out incense cones, you will need a burner, some incense, and an altar.
As these examples show, incense can be shaped and infused in many shapes, mainly for various ritual purposes in different parts of the world.
Whatever the reason, burning incense requires basic materials and special care when handling an open flame.
If you plan to get incense waterfall at home or outside, remember to bring a lighter and matches and never leave the incense unattended.
You can use any ceramic or metal bowl (or glass).
It’s great if you have a jar of old soot. If this is your first, you can fill it with clean fine sand.
Some incense shops also sell boat-shaped incense burners or ash traps. Note, however, that this type of incense burner is only suitable for core incense.
Loose Incense – Not as common as chopsticks or cones, Loose Incense is still the choice of many wizards.
It consists of a mixture of crushed herbal leaves, flowers, bark and resin. Burning incense requires a constant source of heat – a charcoal tray is your best bet.
Loose incense is difficult to store for later use, so it’s important to use only the amount you need.
You might be able to salvage some, but it’s a challenge.
To put out incense cones, you will need to hold the cone away from the flame.
Now place the cone on the base of the censer. There is no general rule of thumb about where to place cones.
It is usually mentioned on the product packaging.
Usually, a hole is provided on the surface where you need to place it. You will know when you see it.
Find a heat-resistant container that can hold an incense stick.
Cones generate a lot of heat, so it’s important to find containers like ashtrays or ceramic bowls that are safe to keep warm.
Spread about 1 cm of sand on the bottom of the chosen container to help heat distribution. research source
Incense Station – Make sure the plate holding the incense stick is clean and the holes are clean.
If you use the incense holder multiple times, the resin from the previous incense stick may stick to the plate.
This reduces the amount of air that can reach the incense cone and affect its combustion
To put out incense cones, you will need to light the incense burner and set the cone.
The incense cone emits a fragrant smell when it burns, and produces a lot of smoke at the same time.
To start smoking, place the cone in a heat-resistant container and ignite the tip of the cone to create a flame.
When the tip of the cone turns orange, your incense is ready to be enjoyed.
Hold the cone in one hand and light the tip with a match or lighter in the other hand.
Be careful not to burn yourself.
Make sure the incense cone is in full contact with the burning flame. Wait for the cone to ignite with a small flame.
Conical flames can be more difficult to maintain than wands. If the flame dissipates quickly, repeat the process again.
After placing the incense stick on the burner with the tip facing up, light the tip with a lighter or match.
Once the cone is on fire, let the tip burn for 5 to 10 seconds, then blow out (or fan) the flame.
If done correctly, the top of the cone will still light up, but it will not catch fire. Your cones will begin to smolder and burn into fragrant smoke.
Incense cones usually burn for no more than half an hour.
