Netgear Orbi SRR60 is one of the best options to consider whosoever desire for a quality router along with a mesh system. SRR60 is one of the easiest devices to use that delivers continuous internet range throughout the home.
But, like any other WiFi device, SRR60 is also prone to technical glitches, be it orbilogin, orbi firmware, or orbi setup-related issues. As you are on this post, you don’t have to worry about anything. In this post, we have tried to cover as many queries that are frequently asked by SRR60 users daily. Here we go!
Netgear Orbi SRR60
Queries and Their Answers
Is Netgear Orbi SRR60 Good?
If you are about to buy this router, then let us tell you that this is one of the finest decisions you have made.
For how long can I use it?
This device can be used for more that 5-6 years without any issue. So, without any doubt, just go for it.
How can I manually update Orbi firmware?
To manually update your satellite’s firmware, follow the instructions highlighted below in exact given order.
- Launch a web browser on a computer or laptop.
- Enter orbilogin.com in the URL bar.
- The Orbilogin window displays.
- Enter your Orbi router login details.
- The SRR60’s BASIC home page displays.
Once you are logged in successfully, select the following options one by one:
- Advanced
- Administration
- Firmware Update
- Manual Update.
Fab! You are almost there. The Firmware Update page displays.
- Follow the on-screen instructions.
I am unable to log in to My Netgear Orbi
If you are unable to log in to your Orbi WiFi system, then make sure that you are using the correct login credentials. Just in case, you have changed the login password of your device at its initial configuration, we suggest you to use them. And, for default one, refer to its manual.
What if I forgot the Orbi login details?
No worries! If you have forgotten the admin credentials of your device, then they can easily be recovered by resetting SRR60.
I don’t know how to Reset Orbi
Fret not! We have got you covered! Scroll down to know the reset instructions.
- Disconnect your Orbi and satellite.
- Locate the reset hole on your Orbi.
- Once found, press it gently.
- The blinking power LED on your Orbi device indicates that it has been reset successfully.
What is the default web of My SRR60?
The default web address of your Orbi device is orbilogin.com or orbilogin.net.
Where can I find SRR60’s IP?
You can also log in to your orbi device using its IP. To know the IP address of your Orbi device:
- Click on the Start button on your desktop or laptop.
- Enter CMD in the search bar.
- Command prompt window will be displayed.
- Type ipconfig and hit the enter key.
- The IP address of your Orbi device will be displayed.
Note: You can also find the IP address of your Netgear Orbi on the back panel.
I am unable to set up My Orbi device
If you are unable to configure your Orbi device, then it can be due to:
- Use of wrong Orbi router login details.
- You are not connected to Orbi’s WiFi.
- The device web or the IP address isn’t working.
- Followed the incorrect setup steps.
- For Orbi setup steps, you first need to log in to the device and then follow the exact instructions as per the model you have.
My Orbi is not Working
If your Orbi device stops working suddenly, then it can be due to sudden power outage or it is not getting a steady power supply. In that case, we suggest you to restart your Orbi device once. This process is called power cycling.
After restarting your Orbi device, make sure to do the following:
- Plug it into a working wall outlet.
- Provide it a continuous power supply.
- Connect it to the satellite using a wireless source.
Orbi failed to Connect to Satellite
The main reason why Orbi SRR60 is not connecting to satellite is that the distance between both of them is too much. Bear in mind, if the distance between your Orbi device and satellite is more than 15-20 feet you will face issues while connecting them. So, try to shorten the distance between the two.
Orbi not Working after Firmware Update
If your Orbi device is not working after firmware update, then it means that:
- A wrong version of firmware has been downloaded
- The firmware process has been interrupted
- Your Orbi device doesn’t need an update.
Verdict
Enough about Netgear SRR60 Orbi! If you still have queries apart from the above-mentioned ones, feel free to them all into the comments section.
