Wireless-N WiFi repeaters have won millions of hearts in the realm of the networking world. The reason is their ability to fill every corner of the house with a super-fast internet connection. Apart from this, they come packed with numerous features that have spellbound every netizen. Despite endless features, Wireless-N WiFi repeaters are also prone to various problems. One such issue is the Wireless-N repeater not connecting to the router. This issue can further result in WiFi repeater login issues.
So, before you run out of time, consider giving a shot to the troubleshooting tips mentioned in this post to get rid of the problems. Let’s get the ball rolling.
Fixed: Repeater won’t Connect to Router
Improve the Repeater-Router Connection
Let’s talk about the connection between your WiFi devices first. Which source you have used to connect your Wireless-N WiFi repeater to the host router? A wired source? Well, that’s a pretty good choice. But, did you check the condition of the Ethernet cable before connecting your devices? Probably not. So, check for the same and see if your Ethernet cable is free of cuts or not. If not, then get it replaced with a non-damaged one. You need to check the firmness of the connection too.
What happened? Have you utilized a wireless source? No worries! We’ve got you covered too. For a wireless source to work effectively, your devices need to be present within each other’s range but not too close. Else, their WiFi signals will get hampered and the issue will keep troubling you.
Reboot Your Wireless-N Repeater
If there was nothing wrong with the connection between your Wireless-N repeater and the host router, then there are chances that technical glitches are eating up your extender’s efficiency. You can simply revive your repeater’s performance by giving it a reboot. In case you don’t know the correct instructions to reboot your Wireless-N repeater, check these steps:
- Remove the wired or wireless source using which you have created the repeater-router connection.
- Switch off your Wireless-N WiFi extender.
- Disconnect it from the power source.
- Give some time to your Wireless-N repeater.
- Connect your WiFi repeater back to the power source.
- Switch on your Wireless repeater.
- Re-establish a connection between your Wireless-N repeater and the host router.
Relocate the Repeater
Users are advised to change the location of their device after Wireless repeater setup. However, many users select the incorrect location and end up having trouble with their extenders. Perhaps, you are among those users. So, answer a question. Is your Wireless-N repeater placed inside a cabinet? If yes, relocate it right away.
Remember that the new location of your Wireless-N WiFi repeater should be away from corners and concrete walls. In addition, do not select the placement that includes microwave ovens, televisions, refrigerators, treadmills, mirrors, lenses, glasses, fish tanks, metal doors, Bluetooth speakers, baby monitors, etc. Choose the center-most location in your house to ensure equal distribution of WiFi signals.
Remove Surplus Devices
Your Wireless-N repeater might also fail to connect to the host router if too many devices are accessing it. Higher the number of devices accessing your repeater, lower the chances of your WiFi repeater connecting to the host router.
To rid yourself of the trouble, consider removing additional devices accessing your Wireless-N WiFi repeater. Once done, check whether your Wireless-N repeater is still struggling to get connected to the host router. If yes, then give a shot to the ultimate hack mentioned in the next point.
Reset Your WiFi Repeater
If nothing has borne a positive result till now, then there is a possibility that your Wireless-N repeater is improperly installed. In that case, you need to reconfigure it. However, it can’t be done without doing Wireless-N WiFi repeater reset. The reset process is all about erasing every customized setting from the repeater.
To reset the Wireless-N repeater, look for the Reset button, and press it with the help of a sharp object. Once you are done with the Wireless-N repeater reset, consider accessing the repeater’s default IP address and setting it up from scratch.
Final Words
People do a Wireless-N repeater setup to cater to the need for a lag-free internet connection. However, this need remains unfulfilled due to the Wireless-N repeater not connecting to the router issue. Hopefully, you will be able to re-establish a connection between your WiFi devices successfully with the troubleshooting techniques mentioned above.
