If you want your Amped wireless range extender to perform smoothly and effortlessly, then you must keep its firmware up-to-date always. But, what’s this? Tried update the latest firmware version on your Amped wireless range extender but got stuck with issues? Need not to worry! The firmware update stuck is can be because of a vast number of reasons.
Regardless of what is preventing you from updating Amped wireless range extender firmware, the tested and proved tips highlighted below will surely help you regarding the same.
Resolved: Amped Extender Firmware Stuck
Fix 1: Verify the Power Supply
Let us start with the basic fix first. Note it down that a proper power supply is very important during the entire firmware update process. There is a possibility that the electricity got fluctuated while performing Amped wireless range extender firmware update process. If this is the reason, why you are stuck with the firmware update stuck issue.
For fixing it, restart your Amped wireless range extender once. Once you are done, perform the firmware update process again.
Fix 2: Check the Connection
Another reason that might be preventing you from updating Amped wireless range extender firmware is the improper connection between the devices.
So, without much delay, troubleshoot the issue by connecting your Amped wireless range extender and router way using any (wireless or Ethernet) source.
Just in case, if you are thinking to connect your wireless range extender and router in a wireless manner, than ensure that the distance between them is not too much.
And, if you are using an Ethernet connection for the same, ensure that the Ethernet cable isn’t worn out or damaged from anywhere.
Fix 3: Verify the Configuration
By any chance, if you haven’t configured your Amped wireless range extender correctly, then it’s crystal clear why you are getting the firmware update stuck issue. To deal with the issue, navigate to setup.ampedwireless.com page and ensure that your Amped wireless range extender is configured properly.
Fix 4: Check the Firmware Version
Amped wireless range extender firmware update stuck issue can also occur if you have downloaded the wrong firmware or interrupted the process.
To troubleshoot the issue, it is advised that you download the correct firmware version as per the Amped wireless range extender model you have and wait for the process to get completed.
Note this down that the Amped range extender firmware update process will take a longer time to complete. So, you have to remain calm. Please, do not turn of your wireless range extender, click on link, or disconnect it from your existing router.
Fix 5: Perform the Reset Process
If the hacks listed above doesn’t help you, fret not! This last remedy will surely be a solution for the issue you are getting right now.
Resetting, it is one of the best hacks known for fixing major issues with Amped wireless range extender.
Thus, to reset your Amped range extender:
- Look for the reset hole on it.
- Disconnect your router and Amped range extender as well.
- Press and hold the Amped extender’s reset hole and release it.
Fab! Amped wireless range extender resets successfully. Now, perform Amped wireless setup process from the scratch and then, update its firmware. This time, you will not going to stuck with Amped wireless range extender firmware update failed issue for sure.
Wrapping Up
Our troubleshooting guide on how to fix Amped wireless range extender firmware update stuck issue ends here. We hope that the fixed mentioned in this post help you fix the issue. We are eagerly waiting for your answer.
