A water heater that is functioning properly should not be neglected until it stops working. What could be more frustrating than finding out that hot water isn’t coming from your heater, or that the water pressure has dropped? These are just a few of many issues your electronic or gas-powered water heater could encounter in its lifetime.
You can easily fix most of these problems at home. We will be discussing the most common problems with water heaters and the possible solutions to ensure your heater is in top condition so you can enjoy it to its full potential.
Here are the Most Common Water Heater Problems and Their Solutions
There are many types of water heaters, both electronic and gas-powered. Although they can use different energy sources, the basic design of water heaters is almost identical. The solutions to most common water heater problems are almost identical.
We’ll be discussing the top 5 problems with water heaters and the solutions. This website has additional tips and tricks that you might find useful. Read this article to know more.
1: There is not hot water.
Most consumers experience this problem when their water heater stops producing hot water after it has been on for several hours. This is usually due to poor maintenance on your water heater. The water heater is not large enough to heat hot water sufficient for your daily needs.
A frozen pipe could be the main reason why a water heater doesn’t heat up in cold areas. The water heater can also run out of hot water due to excessive usage. Incorrect upkeep and old heaters are also factors that can cause heaters to stop providing hot water.
This is the solution to your problem
First, inspect the pipe. To ensure the water stays warm, pipe insulation can be installed if this happens. It is also advisable to upgrade to a larger model if your household grows or the machine gets too old.
2. Water is too hot
This problem is quite different from the one you had previously. It is possible that your water supply from the household faucets has become scorching. Your hand might also burn. What causes this? This could be caused by the thermostat setting at an inappropriate temperature.
If you accidentally set the thermostat at a temperature higher than the recommended setting, the faucet will produce boiling hot water.
This is the solution to your problem
The thermostat temperature should be lowered by a few degrees. As a guideline, the thermostat temperature should be set at 120 degrees F. Before you reset the thermostat, turn off your water heater for at least two hours.
For your safety, you should also make sure that the electricity is turned off. The majority of electric water heaters have two thermostats. To ensure that the system functions properly, both thermostats must be set to the same temperature.
3. Insufficient water pressure
Sometimes the water pressure from the taps may be insufficient. In this instance, it is worth inspecting the water heater carefully. Low water pressure could be due to damaged components in the water heater.
Water pressure may also be affected by leakages, clogged faucets or plumbing systems. Before you begin water heater repairs, ensure that your water pressure is sufficient throughout your property. You must fix the problem if your water pressure drops. For professional help visit this website.
This is the solution to your problem
The water pressure relief valve needs to be fixed first. To tighten the screw and increase water pressure, turn the valve counterclockwise. You should inspect the pipe for cracks, including the connection between the water heater and the faucet. To prevent further damage, repair any leaks with piping tape or Teflon.
4. A strange sound is coming from your water heater.
Sometimes, the water heater can make an unusual amount of noise. This is most common with heaters with a tank. Modular water heaters, however, are quieter unless they have a problem or one of their components is not working properly.
Water heater sounds can be caused by a number of things, including a clogged fan or hard water that has calcium deposits, a leak in a combustor and other issues.
This is the solution to your problem
Older water heater models will make noise if calcium deposits build up at the bottom. It is important to thoroughly clean the tank. The heater could be buzzing because of one or more pieces. You should inspect the heater thoroughly and try to fix any loose pieces.
5: The water had a foul odor.
If you turn on your water faucet and notice rotten eggs smell immediately, it’s a sign that your water heater has stopped working properly. It is possible for the water to smell like raw sewage. This happens when the anode in the water heater is too old to work properly. It is located in the tank of the water heater, drawing the user’s attention. The tank is therefore free from rust.
This is the solution to your problem
The water heater’s anode will work fine for three to five years. If the anode is too old, it will need to be replaced. To do this, turn off both the water heater and the electricity source. You should drain the heater and remove the old anode with a socket wrench or adjustment wrench. Next, switch the old anode to the newer one.
Parting words
A water heater should have a long life expectancy. It should be able to heat water for 10 years. If it is not maintained properly or is prone to faults, it could start to malfunction. These five issues will help you to identify the root cause of the problem. If you are unsure whether you can replace the anode, or reset the thermostat yourself, a plumber may be able to help you Read more
